electriQ 60cm Curved Glass Chimney Hood - Stainless Steel
This unbranded 60cm chimney cooker hood combines modern style with practical functionality, making it an elegant addition to any kitchen. Featuring a stunning curved smoked glass canopy and a sleek stainless steel finish, its unbranded design allows it to blend seamlessly alongside existing appliances. The cooker hood offers flexible installation for either external air extraction or internal recirculation, eliminating the need for ducting by utilising an optional carbon filter (sold separately). The height-adjustable chimney (497–842mm) can be adjusted to fit your layout perfectly too.
The hood features three fan speeds and a maximum extraction rate of 285 m³/h, making it ideal for efficiently clearing steam and odors from smaller kitchens. Operation is effortless thanks to front-mounted push-button controls that manage both fan speeds and independent LED lighting, which illuminates your workspace while cooking or creates a relaxing ambiance when entertaining.
Key features
- Efficient Performance: Three fan speeds with a maximum extraction rate of 285m³/h, perfectly suited for quickly clearing smoke and food odors in smaller kitchens.
- Modern Design: Features a premium stainless steel finish with an elegant, curved smoked glass canopy and an unbranded look that complements any kitchen aesthetic.
- Dual Installation Options: Gives you the choice to extract air externally or recirculate it internally (recirculation requires a separate carbon filter).
- Easy Maintenance: Equipped with removable, dishwasher-safe aluminum grease filters to keep the hood running at peak efficiency with minimal effort.
- Simple Controls: Front-facing, intuitive push-button controls make adjusting the fan speed and lighting effortless.
- Independent LED Lighting: A downward-facing LED light clearly illuminates your hob during cooking and can be turned on independently to create a soft kitchen ambiance.
- Eco-Friendly Efficiency: Boasts an impressive 'A' energy rating with a low annual energy consumption of just 18kWh.
- Quiet Operation: Runs at a comfortable maximum noise level of 60–63dB, which is roughly equivalent to a standard conversation.
What's in the box?
- 1 x Chimney cooker hood
- 2 x Aluminium grease filters
Note: Some cooker hoods come with a blue protective film, please remove this before installation.
Question from jrfurank: Asked on 17/03/2026 Hello
Will this hood easily swap for a Cooke & Lewis CLGCH60-CR1 without having to re-drill to fit etc?
Hi, The electriQ 60cm Curved Glass Chimney Hood - Stainless Steel uses its own specific wall mounting bracket and fixing points. Although it is the same 60cm width as the Cooke & Lewis CLGCH60-CR1, we cannot guarantee it will replace your existing hood without adjustments. Minor re-drilling or alignment may be required during installation, so we recommend checking the installation dimensions carefully before fitting.
Thank you.
Question from LOGIK: Asked on 12/02/2026 CAN IT BE USED ON A INTERNAL WALL
Hi, The electriQ 60cm Curved Glass Chimney Hood (EIQCURV60EN) can be installed on an internal wall if used in recirculation mode, where air is filtered through carbon filters and returned to the kitchen without the need for external ducting. However, if you want the hood to extract air outside, the internal wall must allow ducting to an external wall or roof; otherwise, extraction is not possible without modifying the wall. Therefore, for a standard internal wall installation, recirculation mode with carbon filters is the only fully compatible option.
Thank you.
Question from Brenda: Asked on 04/02/2026 Does this cooker hood extract steam from the kitchen?
Hi, This electriQ cooker hood does extract steam and cooking fumes from the kitchen when vented to the outside. It also offers a recirculation option if external venting isn’t possible.
Thank you.
Question from Gayle Willmott: Asked on 28/01/2026 Can the hood be wired in instead of using the plug?
Can the chimney be cut at an angle to fit an angled ceiling?
Hi Gayle,The electriQ 60?cm Curved Glass Chimney Hood can be hard-wired by a qualified electrician, but the chimney must remain vertical and cannot be cut for an angled ceiling. For sloped ceilings, use a decorative trim or panel to bridge the gap while keeping the chimney upright.Thanks!
Question from Electricq 60cm curved glass chimney hood: Asked on 08/12/2025 Is the height of the casing for the extracted fan pre cut to height because it has a variable height measurement
Hi,The casing of the electriQ 60cm Curved Glass Chimney Hood (EIQCURV60EN) is adjustable in height and is not pre-cut to a fixed size. The chimney section can be extended or compressed to fit ceiling heights within the range of approximately 497?mm to 841?mm, so in most installations, no cutting is required. Only if your space falls outside this range would any modification be needed.Thanks!
Question from Charlie: Asked on 25/11/2025 Would this perfectly replace the Baumatic BECH60GL 60 cm Chimney Cooker Hood - Stainless Steel / Glass? Need same dimensions and curve.
Hi Charlie, this model can be used as a replacement for the Baumatic BECH60GL in terms of width and curved glass design. However, please note that the electriQ hood has a slightly smaller canopy depth (470 mm vs. 500 mm), so it may sit a little differently over your hob and in relation to your existing cabinetry. We recommend measuring your space to ensure it fits and looks as expected. Thank you.
Question from Dave: Asked on 19/10/2025 Can I use a filter not wall fan ?
Hi Dave, yes, you can use this model in recirculation mode without needing to install it as a wall fan (external venting). Required carbon filters for recirculation mode are available at the "Recommended Accessories" or "Package Deals" sections of the product's page. Thank you.
Question from TK: Asked on 05/10/2025 Could you please give me the horizontal measure between the two wall mounting slots/screw holes for the main cooker hood unit
Hi, you will need to drill 4 holes, 2 for the inner chimney bracket and 2 for hanging the hood. The lower holes are approximately 120 mm, and the upper holes are about 150 mm. If you require the installation manual, please get in touch with our customer service: https://www.appliancesdirect.co.uk/help-and-advice/customer-service. Thank you.
Question from sticks: Asked on 20/09/2025 can this be plugged into a socket
Hi,Yes, the electriQ 60 cm Curved Glass Chimney Hood (EIQCURV60EN) comes ready for immediate use, as it is supplied with a plug attached to a 160 cm cable, operating on a standard 220-240V∼50 Hz supply.Thanks!
Question from David: Asked on 20/09/2025 how long is the plug to socket please as I want to buy it Tuesday thank you
Hi David,The electriQ EIQCURV60EN 60 cm Chimney Hood is supplied with a 165 cm (1.65 meter) power cable; if your socket is further away, you should use a high-quality, 13A-rated, heavy-duty extension lead, while acknowledging that some appliance manufacturers advise against the use of extension leads for safety reasons.Thanks!
Question from Derek Parsons: Asked on 01/08/2025 Chimney dimensions
Hi, The chimney of the electriQ 60cm Curved Glass Chimney Hood (SKU: EIQCURV60EN) measures 210mm wide and 260mm deep. The overall hood size is 600mm wide, 470mm deep, and the height is adjustable from 497mm to 841mm. The chimney is wall-mounted and has an extendable air outlet for flexible installation. Thanks!